How to Clean a MANSCAPED Lawn Mower 5.0 Ultra
The MANSCAPED Lawn Mower 5.0 Ultra uses two interchangeable heads: a toothed SkinSafe trimmer blade and a more delicate foil blade. Hair collects differently beneath each head, so simply rinsing the assembled trimmer can leave clippings around the drive post and under a comb. MANSCAPED describes the 5.0 Ultra as waterproof and directs owners to remove the comb and blade head, rinse the detached pieces, and air-dry them on a towel. This guide focuses on that model and its original attachments. It keeps the powered handle separate from the USB-C cable or wireless pad, avoids wiping across the foil and ensures every connection is dry before the head is reattached or the trimmer is charged.
Published · Updated
Primary reference: MANSCAPED official Lawn Mower 5.0 Ultra use and cleaning guide. Always check the manual for your exact model.
Quick reference
- Check first
- Power off, disconnect charging and identify the trimmer or foil head.
- Disassemble
- Remove the comb and pop off the active blade head.
- Routine clean
- Brush trapped hair, rinse every detached piece and wipe the handle.
- Avoid
- Foil pressure, metal prying, high heat and charging while damp.
- Ready when
- The drive cavity is dry and the undamaged head clicks in securely.
What you will need
- The Lawn Mower 5.0 Ultra instructions
- Cool or lukewarm running water
- The supplied cleaning brush
- Soft lint-free cloths
- A clean absorbent towel
- A ventilated drying area
- The original combs, trimmer head and foil head for inspection
Step-by-step instructions
Step 1: Turn off and disconnect the trimmer
Switch the Lawn Mower off and remove any USB-C cable. Take it away from the charging pad. Engage the travel lock only after cleaning; the important first step is ensuring the motor cannot start while fingers are handling a detached blade.
Step 2: Remove the comb and active blade head
Slide off the fixed or adjustable comb. Pop off either the trimmer blade or foil head using light, even pressure. Keep track of which head was installed and inspect its locking tabs. Do not lever a head off with a metal tool or press on the center of the thin foil.
Step 3: Brush away compacted hair
Use the supplied brush around the drive post, underside of the detached head and teeth of each comb. Brush outward so hair does not move deeper into the handle opening. On the foil head, clean the underside gently and never force bristles through the perforated shaving surface.
Step 4: Rinse the detached parts
MANSCAPED directs users to rinse the separated comb and blade head under the faucet until hair is gone. Rotate the trimmer head so water reaches between teeth; let water flow through the underside of the foil head without squeezing it. Avoid very hot water and abrasive cleaner.
Step 5: Rinse and wipe the waterproof handle
Rinse loose residue from the waterproof 5.0 Ultra handle, keeping the charging cable and pad elsewhere. Wipe around the buttons, LED light and head seat with a soft cloth. Do not pack soap, shaving cream or oil into the drive opening.
Step 6: Inspect the two heads separately
Check trimmer teeth for chips and confirm the foil is smooth, tight and free of holes. A foil crease or broken tooth can contact skin and should not be straightened with pliers. Replace the affected head rather than testing it during a close shave.
Step 7: Air-dry every component
Set the handle, comb and detached head on a clean towel in moving room air. Position the head so its underside drains. Do not use a hair dryer, radiator or direct sun, and do not snap wet parts together merely because their exterior feels dry.
Step 8: Reassemble and charge only when dry
Once no water remains around the drive post or head cavity, press the chosen blade head evenly into place until secure and reinstall a dry comb if wanted. Confirm the head does not rock. Charge with the USB-C cable or wireless pad only after the handle and charging area are completely dry.
Specific cleaning questions
Open a question for a concise answer about stains, odors, safety, frequency, and troubleshooting.