How to Wash Vuori Clothes Without Damaging the Fabric

Step-by-step instructions

Step 1: Read the label before sorting

Check the sewn label every time you wash a new Vuori style. Record whether it permits machine washing and tumble drying and whether it contains special instructions for lining, zippers, prints, or wool. If the online product page and label seem different, follow the label attached to the garment. Empty pockets and inspect seams so washing does not enlarge a small tear.

Step 2: Let sweaty clothing air briefly

Do not seal damp workout clothing in a gym bag for hours. Hang it in moving air until laundry time so odor-causing moisture is not trapped. Keep it away from a radiator, direct high heat, and prolonged strong sun. Airing slows odor but does not remove body oil, sunscreen, or detergent residue.

Step 3: Pretreat stains gently

Blot liquid with a white cloth and lift solids without rubbing them deeper. Test diluted mild detergent on an inside seam, then dab the stained area from the edge toward the center. Avoid chlorine bleach, stiff brushes, and aggressive soaking unless the exact label authorizes them. Rinse the treated spot lightly so a concentrated detergent ring does not remain.

Step 4: Turn technical garments inside out

Close zippers, secure drawstrings, and turn joggers, leggings, shorts, and shirts inside out. Put delicate pieces in a mesh bag. This protects the visible face and reduces friction against hardware. Do not wash them with towels, rough denim, open hook-and-loop closures, or garments with exposed hooks because abrasion can roughen soft performance fabric.

Step 5: Make a small compatible load

Sort like colors and smooth synthetic fabrics together. Keep lint-producing cotton towels and heavy items out of the load. Leave enough space for water to circulate; a tightly packed drum increases rubbing and may leave detergent in waistbands and pockets. Wash a new saturated color separately if its label warns about dye transfer.

Step 6: Use cold water and modest detergent

Select the cold setting and a gentle or delicate cycle unless the sewn label directs otherwise. Add only the mild detergent amount needed for the load size and water hardness. Skip fabric softener and dryer sheets. Vuori explains that their coating can inhibit a technical fabric's performance, and extra fragrance does not remove odor trapped under residue.

Step 7: Hand-wash a label-directed piece

For a piece that calls for hand washing, fill a clean basin with cool water and a small amount of mild detergent. Move the garment gently through the water without twisting, stretching, or rubbing sections together. Drain and rinse until the water is clear and no longer slippery. Press water out against the basin, then roll the garment in a clean towel instead of wringing it.

Step 8: Choose the label-approved drying method

Hang or lay the garment smoothly when practical. Support wet waistbands so one clip does not stretch them. If the label permits tumble drying, use low heat, remove the piece promptly, and do not add a dryer sheet. High heat and overdrying can stress elastic fibers, bonded details, and printed graphics even when a dryer is allowed.

Step 9: Check for residue after drying

When fully dry, smell high-contact areas and feel waistbands for slickness. Persistent odor or a coated feel often indicates too much detergent or a crowded rinse. Rewash cold with no added detergent and add an extra rinse rather than covering the problem with softener. Do not store any section that is still damp.

Step 10: Adjust the routine by garment

Keep the label instructions with the product name in your laundry notes. Separate a specialty Vuori fabric that does not share the standard performance-care routine. Clean clothing after sweaty use, but avoid unnecessary hot cycles or repeated washing of a barely worn item. Correct sorting, a small detergent dose, and low heat protect the garment more reliably than specialty additives.