How to Clean a Casper Dog Bed Correctly
A Casper dog bed is built as a layered product, not as one washable cushion. Its removable outer cover can be machine washed, while the foam sleep surface and bolster inserts remain inside separate protective compartments and should not be sent through the washer. Casper's care sequence includes removing the bolsters and bed insert, closing the inner cover and washing the removable cover in cold water on a gentle cycle before low-temperature drying. Separating those layers correctly prevents a common mistake: saturating dense foam that may take a long time to dry and can retain odor beneath an apparently dry surface.
Published · Updated
Primary reference: Casper official dog-bed care instructions. Always check the manual for your exact model.
Quick reference
- Washable
- The empty removable outer cover, after checking its sewn label.
- Keep dry
- Central foam bed and bolster inserts; spot-clean minimally if needed.
- Washer
- Cold water, gentle cycle and mild detergent.
- Dryer
- Tumble the cover on low heat and dry seams completely.
- Avoid
- Whole-bed washing, soaked foam, bleach, fabric softener, wringing and high heat.
What you will need
- Casper's current dog-bed care instructions
- Vacuum with upholstery and crevice tools
- Lint roller or pet-hair brush
- Clean white cloths
- Mild laundry detergent without bleach
- Washing machine with a cold gentle cycle
- Dryer with a low-heat setting or drying rack if the label permits
- Fan and dry towels for spot-cleaned inner components
- Optional enzyme product approved for the exact cover fabric
Step-by-step instructions
Step 1: Read the sewn care label and identify every layer
Confirm that the bed is a Casper model with the removable cover and inspect its current label before using the general instructions. Locate the outer zipper, the central bed insert and the separate bolster pieces. Note any waterproof protector or replacement cover added later, because that accessory follows its own label. Do not assume the foam, bolster fill and outer fabric share one wash method.
Step 2: Remove hair and dry soil before opening the cover
Take the bed to a well-ventilated area and vacuum the top, seams and lower edge. Lift embedded hair with a lint roller or pet-hair brush. Dry removal keeps fur from coating the washer and prevents grit from abrading the cover. Check for fleas, sharp debris, a damaged zipper or an exposed foam edge before taking the bed apart.
Step 3: Unzip and remove the bolster inserts
Open the outer cover carefully without forcing the zipper around a tight corner. Remove each bolster and keep its orientation clear for reassembly. Then remove the central dog-bed insert as Casper directs. Support the foam with both hands rather than bending or pulling it through a small opening. Set all inserts on clean dry towels away from the laundry area.
Step 4: Close the inner protective cover
Casper instructs owners to zip the inner cover around its perimeter and inner compartment after the inserts are removed. Check that the zipper tracks are free of hair and fabric. Closing the compartment helps the empty cover keep its intended form during washing and reduces stress on exposed seams. Do not wash with a zipper partly open or caught under a folded edge.
Step 5: Pretreat only with a compatible mild method
Blot a fresh spot from the outside inward with a clean cloth. Test any mild detergent solution on a concealed area and use the smallest amount needed. Avoid bleach, fabric softener, solvent, abrasive brushing and strongly fragranced products. For an enzyme cleaner, verify compatibility with the sewn label and rinse requirement; do not let pretreatment soak through to an inner foam piece.
Step 6: Machine-wash the removable cover cold and gentle
Place the empty closed cover in the washer without overpacking the drum. Use cold water, a gentle cycle and a modest amount of mild detergent, following Casper's care direction and the label. Wash it separately from lint-producing towels, hook-and-loop items and garments with exposed hardware. An extra rinse can help remove detergent if the machine or label permits.
Step 7: Dry the cover on low heat
Casper specifies tumble drying the cover on low. Untangle it before loading and do not use high heat, which can shrink fabric, distort backing or stress zipper tape. Remove it promptly and open the compartments so warm humid air can escape. If the sewn label differs, follow the label. The cover must be dry through seams and folded edges, not merely warm on the surface.
Step 8: Spot-clean inserts without saturating foam
If an insert needs attention, first vacuum it gently. Blot a small affected area with a barely damp cloth and mild compatible solution, then lift residue with another cloth. Never machine-wash, soak, wring, steam or heat-dry the foam unless Casper's current instructions specifically allow it. Press dry towels against a damp spot and use moving room air until the interior is completely dry.
Step 9: Inspect the dry components before reassembly
Look for crumbly foam, a torn inner liner, flattened bolster fill, odor that returns when pressed or zipper damage. Do not conceal wet or contaminated foam inside a clean cover. Replacement is the better path when an insert is deeply saturated, deteriorating or cannot be dried fully. Clean hair from the zipper slider and confirm every compartment is open and ready.
Step 10: Reinsert the bed and bolsters without twisting them
Slide the central insert into its correct compartment and work each bolster around the perimeter in its original orientation. Smooth corners rather than forcing the zipper over a lump. Close the cover, shape the bed and press around the edge to confirm even support. Return it to use only when the cover and all inner pieces are cool, dry and free of cleaner odor.
Specific cleaning questions
Open a question for a concise answer about stains, odors, safety, frequency, and troubleshooting.