How to Clean a Samsung Bespoke Refrigerator
Samsung Bespoke refrigerators can combine glass or metal door panels, a display, coated handles, gaskets and removable food-contact parts, so using one abrasive sponge everywhere can leave permanent finish differences. Samsung's official Bespoke panel guidance separates glass from metal: glass may be wiped with a soft microfiber cloth and glass cleaner, while metal should use a soft lint-free cloth with neutral detergent. Both methods finish with repeated gentle passes and drying, and Samsung says not to spray water or use rough brushes, scrubbers, benzene, thinner, household or automotive detergent. The exact model and panel finish still control. Routine cleaning does not require removing customizable door panels or opening service covers.
Published · Updated
Primary reference: Samsung official Bespoke refrigerator panel cleaning guidance. Always check the manual for your exact model.
Quick reference
- Identify finish
- Confirm glass versus metal from the model or panel documentation.
- Glass panel
- Glass cleaner on microfiber, several gentle passes, then dry.
- Metal panel
- Neutral detergent on lint-free cloth, remove residue and dry.
- Interior
- Mild detergent, controlled moisture and no liquid in vents or controls.
- Avoid
- Direct spray, rough brushes, melamine sponges, thinner and abrasive cleaners.
What you will need
- The Samsung manual for the exact Bespoke refrigerator
- Several soft lint-free microfiber cloths
- Glass cleaner only for a compatible glass panel
- Neutral mild detergent for compatible metal or interior surfaces
- Warm water for removable food-contact parts
- A soft small brush for dry gasket crumbs
- Absorbent towels for catching drips
- A cooler for food during a longer interior clean
Step-by-step instructions
Step 1: Identify every panel finish
Check the model documentation and panel order details for glass, metal or another finish. A reflection is not enough to identify the coating. Test any approved cleaner on a hidden edge. Do not use a melamine sponge, rough brush or scouring pad; Samsung warns that abrasive tools can damage the surface.
Step 2: Protect food and power
For quick exterior wiping, lock controls if the model supports it. For a thorough interior clean, unplug the refrigerator with dry hands if safely accessible or follow the manual's power procedure. Move perishable food to a cooler and do not leave the doors open longer than necessary.
Step 3: Clean a glass door panel
Apply compatible glass cleaner to a soft microfiber cloth, not directly to the door. Wipe the glass three to five times with gentle overlapping passes, following Samsung's method, then buff with a dry cloth. Keep cleaner out of panel seams, the dispenser and display.
Step 4: Clean a metal door panel
Put a small amount of neutral detergent solution on a soft lint-free cloth and wring it well. Wipe the metal three to five times with the grain or finish direction, then remove residue with a separate clean damp cloth and dry. Do not use glass cleaner unless the exact metal-finish guidance allows it.
Step 5: Wipe the display, handles and dispenser area
Samsung recommends a soft wet cloth for the display; make it only lightly damp and follow immediately with a dry cloth. Wipe handles and the exterior dispenser recess without spraying. Keep water away from switches, seams and the ice chute. Use the model's dispenser-cleaning steps for removable trays.
Step 6: Clean gaskets without pulling them loose
Brush away dry crumbs, then wipe gasket folds with a mild soapy cloth. Use a clean damp cloth to remove residue and dry the folds. Inspect for tearing or loss of contact. Do not apply petroleum jelly, bleach or oil unless Samsung specifically directs it for the model.
Step 7: Wash removable shelves and drawers
Remove one part at a time using the manual's angle and release method. Let cold glass warm toward room temperature before contact with warm water to avoid thermal shock. Hand-wash with mild detergent and a soft sponge unless the manual says dishwasher-safe, rinse and dry completely.
Step 8: Wipe the interior with controlled moisture
Lift spills with a mild detergent solution on a cloth, then wipe with a clean water-dampened cloth. Never pour water into vents, lighting, sensors, an ice maker or control housing. Avoid strong fragrance that could migrate to food and never mix bleach with another cleaner.
Step 9: Reassemble and restore temperature
Dry shelf ledges, bins and gaskets before reinstalling parts. Confirm each shelf is seated and drawers move freely. Restore power, verify the set temperatures and wait for normal cooling before reloading highly perishable food. Keep items clear of interior air vents.
Step 10: Address panel damage correctly
If a panel shows a deep scratch, chip, loose edge or uneven stain after gentle approved cleaning, stop polishing. Bespoke panels are replaceable components, but removal requires the exact Samsung process and sometimes service. Repeated abrasive rubbing can turn a small cosmetic mark into a larger finish defect.
Specific cleaning questions
Open a question for a concise answer about stains, odors, safety, frequency, and troubleshooting.