How to Wash Gymshark Clothes and Activewear
Gymshark clothing spans seamless leggings, brushed fabrics, printed tops, hoodies and accessories, so one setting cannot replace the sewn care label. Gymshark's current clothing-care advice is to wash garments inside out at a low temperature—30°C or below—use a mild fragrance-free detergent, avoid tumble drying and air-dry when the label permits. It also recommends separating colors to prevent transfer. This guide turns those principles into a low-friction routine for ordinary washable Gymshark activewear while keeping product-specific decisions visible. A printed tee, padded sports bra and heavy hoodie should not automatically share the same cycle just because the logo is the same.
Published · Updated
Primary reference: Gymshark official clothing-care guidance. Always check the manual for your exact model.
Quick reference
- Temperature
- Follow the label and keep the wash at 30°C or below.
- Preparation
- Separate colors, close hardware and turn washable garments inside out.
- Detergent
- Use a correctly measured mild fragrance-free liquid.
- Friction
- Keep towels, denim and exposed hooks out of the load.
- Drying
- Air-dry when permitted and keep stretch fabric away from high heat.
What you will need
- The sewn label on every Gymshark garment
- Mild fragrance-free liquid detergent
- Mesh laundry bags for bras, straps or delicate trims
- Cold water or a temperature no higher than 30°C
- A drying rack and broad smooth hangers
- A white lint-free cloth for spot treatment
- An optional basin for label-approved hand washing
Step-by-step instructions
Step 1: Separate by label, color and construction
Read every label, then group similar colors and care instructions. Keep whites and pale shades away from new saturated colors. Separate lightweight seamless pieces from heavy hoodies and rough garments. A label requiring hand washing or no tumble drying controls even when another Gymshark item allows more.
Step 2: Prepare sweaty clothes promptly
Do not leave damp activewear compressed in a gym bag. Air it briefly if you cannot wash immediately. Empty pockets, remove detachable cups only when the label permits, close zippers and secure hook closures inside a mesh bag so they cannot catch knit fabric.
Step 3: Pre-treat only the affected spot
Blot a fresh stain instead of rubbing. Test diluted mild detergent inside a hem, then dab the stain with a white cloth. Avoid chlorine bleach, solvent, stiff brushing and long improvised soaks. Protein stains such as sweat or blood should start with cool water, not heat.
Step 4: Turn garments inside out
Gymshark recommends inside-out washing. It exposes the sweat side while reducing friction on logos, prints and visible surfaces. Unroll waistbands and sleeves. Do not tie legs together, which prevents even rinsing and strains wet fabric.
Step 5: Use mesh bags where they solve a real risk
Place strappy bras, items with removable cups, delicate mesh or exposed trim in separate mesh bags. Bags reduce snagging but do not make incompatible garments safe to combine. Keep hook-and-loop straps, towels, denim and hardware-heavy clothing out of the activewear load.
Step 6: Select a cool, gentle wash
Gymshark advises a low-temperature wash at 30°C or below. Use a gentle or sportswear cycle when consistent with the labels. Avoid an overloaded drum because water and detergent must reach each surface. Excess heat and agitation can affect stretch, bonded details and printed graphics.
Step 7: Dose mild detergent correctly
Choose a mild fragrance-free liquid detergent and measure for the load size and water hardness. More detergent does not remove more odor; residue can hold body oil and make fabric feel coated. Unless a label explicitly allows them, skip softener, scent boosters and bleach.
Step 8: Unload and inspect before drying
Remove clothes promptly. Check that a stain is gone before any heat could set it. If fabric feels soapy, use a cool extra rinse. Smooth seams and reshape cups or waistbands gently. Do not wring seamless knit or lift a saturated garment by one strap.
Step 9: Air-dry away from high heat
Gymshark recommends avoiding the tumble dryer and air drying where the label permits. Lay heavy or stretchy pieces flat and hang light tops on broad hangers. Keep printed faces out of intense sun and do not place clothing on a radiator. Avoid ironing prints or elastic unless the label specifically allows it.
Step 10: Troubleshoot odor without harsher products
Confirm the garment became fully dry and that detergent was not overdosed. Clean the washer's detergent drawer and gasket if multiple loads smell stale. Rewash according to the label with a measured dose and full rinse. Retire or repair a garment if elastic, bonded seams or hardware are damaged.
Specific cleaning questions
Open a question for a concise answer about stains, odors, safety, frequency, and troubleshooting.